JOURNAL PUBLICATIONS

 

 

  • Alaca, B.E., Ozcan, C. and Anlas, G ., “Deterministic assembly of channeling cracks as a tool for nanofabrication”, Nanotechnology, Vol. 21, No. 5, Art. No. 055301, 2010.

 

  • Alkan, V., Karamihas, S. M. and Anlas, G., “Experimental Analysis of Tyre Enveloping Characteristics at Low Speed”, Vehicle System Dynamics, Vol. 47, No. 5, pp. 575-587, 2009.

 

  • Ozturk, U. E. and Anlas, G., “Energy Absorption Calculations in Multiple Compressive Loading of Polymeric Foams”, Materials & Design, Vol. 30, No. 1, pp. 15-22, 2009.

 

  • Yilmaz, Y. and  Anlas, G., “An Investigation of the Effect of Counterweight Configuration on Main Bearing Load and Crankshaft Bending Stress”, Advances in Engineering Softwares, Vol. 40, No. 2, pp. 95-104, 2009.

 

  • Baslamisli, S. C., Kose, I. E. and Anlas, G., “Gain-scheduled Integrated Active Steering and Differential Control for Vehicle Handling Improvement”, Vehicle System Dynamics, Vol. 47, No. 1, pp. 99-119, 2009.

 

  • Oral, A., Lambros, J. and Anlas, G., “Crack Initiation in Functionally Graded Materials under Mixed Mode Loading: Experiments and Simulations”, Journal of Applied Mechanics, Vol. 75, No. 5, Art. No. 051150, 2008.

 

  • Ozturk, U. E. and Anlas, G., “Multiple Compressive Loading and Unloading Behavior of Polymeric Foams”,  Journal of Polymer Engineering, Vol. 27, No. 8, pp. 607-619, 2007.

 

  • Baslamisli, S. C., Kose, I. E. and Anlas, G., “Robust Control of an Anti-Lock Brake System”, Vehicle System Dynamics, Vol. 45, No. 3, pp. 217-232, 2007.

 

  • Oral, A. and Anlas, G., “Effects of Radially Varying Moduli on Stress Distribution of Nonhomogeneous Anisotropic Cylindrical Bodies”, International Journal of Solids and Structures, Vol. 42, No. 20, pp. 5568-5588, 2005.

 

  • Anlas, G. and Elbeyli, O., “The Nonlinear Vibrations of a Simply Supported Rectangular Metallic Plate Subject to Transverse Harmonic Excitation ın the Presence of a One-to-One Internal Resonance”, Nonlinear Dynamics, Vol. 30, pp. 1-28, 2002.

 

  • Anlas, G., Santare, M. H. and Lambros J., “Dominance of Asymptotic Crack Tip Fields in Elastic Functionality Graded Materials”,  International Journal of Fracture,  Vol. 115, No. 2,  pp. 193-204, 2002.

 

  • Anlas, G. and Tüzer, O., “Design of Laminated Composite Plates Containing a Hole under In-Plane Loadings”, Journal of Reinforced Plastics and Composites, Vol. 20, No. 12,  pp. 1024 – 1035, 2001. 

 

  • Anlas, G. and Goker, G., “Vibration Analysis of Skew Fibre-Reinforced Composite Laminated Plates”, Journal of Sound and Vibration, Vol. 242, No. 2, pp. 265-276, 2001.

 

  • Elbeyli, O and Anlas, G., “The Nonlinear Response of a Simply Supported Rectangular Metallic Plate to Transverse Harmonic Excitation”, Journal of Applied Mechanics, Vol 67, No. 3, pp. 621-626, 2000.

 

  • Anlas, G., Santare, M. H., Lambros J., “Numerical Calculation of Stress Intensity Factors in Functionally Graded Materials”, International Journal of Fracture, Vol. 104, No. 2, pp. 131-143, 2000.

 

  • Lambros J., Narayanaswami, A., Santare, M. H. and Anlas, G., “Manufacture and Testing of a Functionally Graded Material”, Journal of Engineering Materials and Technology, Vol.121, pp. 488-493, 1999.

 

  • Anlas, G., “Effect of Two-to-One Internal Resonance in a Nonlinearly Restrained Fluid Valve”, Journal of Vibration and Acoustics, Vol. 121, pp. 59-63, 1999.

 

  • Kayran, A. and Anlaş, G., “Effect of Stacking Sequence on Free Vibration Frequencies of Laminated Composite Circular Cylindrical Shells”, Journal of Vibration and Control, Vol. 5, pp. 355-372, 1999.

 

  • Ardıç, E. S., Anlaş, G. and Erarslanoğlu, G., “Failure Prediction for Laminated Composites under Multiaxial Loading”, Journal of Reinforced Plastics and Composites, Vol. 18, No. 2, pp. 138-150, 1999.

 

  • Anlas, G., Ardıç, S. and Gediz, A., “Calculation of Effective Moduli of Filament Wound Tubes”, Journal of Reinforced Plastics and Composites, Vol. 16, No. 17, pp. 1566-1574, 1997.

 

  • Santare, M. H., Crocombe, A. and Anlaş, G., “Anisotropic Effective Moduli of Materials with Microcracks”, Engineering Fracture Mechanics, Vol. 52, No 5, pp. 833-842, 1995.

 

  • Anlas, G., Santare, M.H. and Hall, I. W., “Modeling the Effect of Fiber Breakage on the Elastic Properties of Short Fiber Composites”, Composites Science and Technology, Vol. 54, pp.113-122, 1995.

 

  • Anlaş, G. and Santare, M. H., “A Model for Matrix Cracking in Short Fiber Composites” International Journal of Solids and Structures, Vol. 30, No 12, pp. 1701-1713, 1993.

 

  • Anlaş, G. and Santare, M. H., “Arbitrarily Oriented Crack Inside an Elliptical Inclusion” Journal of Applied Mechanics, pp. 589-594, Vol. 60, September 1993.

 

  • Anlaş, G. and Ertaş, A., “Response of Two Degree of Freedom Rotating Machinery System with Quadratic Nonlinearity”, Transactions of the ASME, Journal of Energy Resources Technology, pp.103-113, June 1990.

 

 

      OTHER PUBLICATIONS

 

  • Başlamışlı, S. Ç., Köse, İ. E. and Anlaş, G., “Design of a Rollover Prevention System”, 4th Automotive Technologies Congress (Otekon 08), Bursa, Turkey, June 01-04 2008.

                                                                                                                                  

  • Yılmaz, Y. and Anlaş, G., “Modeling and Dynamic Analysis of a Diesel Engine Crankshaft System”, 4th Automotive Technologies Congress (Otekon 08), Bursa, Turkey, June 01-04 2008.

 

  • Oral, A., Çopur, İ. H. and Anlaş, G., “Özellikleri Fonksiyonel Olarak Değişen Malzemelerde Karışık Mod Yükleme Altında Çatlak Başlama Açıları ve Gerilim Şiddet Çarpanları”(in Turkish), 8th International Fracture Conference, İstanbul, Turkey, November 07-09 2007.

 

  • Oral, A., Abanto-Bueno, J. L., Lambros, J. and Anlas, G., “Crack Initiation Angles in Functionally Graded Materials under Mixed Mode Loading”, Proceedings of Multiscale & Functionally Graded Materials Conference, Honolulu, Hawaii, USA, October 15-18 2006.

 

  • Baslamisli, S. C., Kose, I. E. and Anlas, G., “Design of Active Steering and Intelligent Breaking Systems for Road Vehicle Handling Improvement”, Proceeding of the 2006 IEEE International Conference on Control Applications, Munich, Germany, pp. 909-914, October 4-6 2006.

 

  • Anlas, G., Santare, M. H., Lambros J., “K-Dominance Issues in Functionally Graded Materials”, Proceedings of ASME, Mechanics and Materials Conference, Blacksburg, Virginia, USA, June 1999.

 

  • Kayran, A. and Anlaş, G., “Effect of Lamination Arrangement on the Modal Characteristics of Laminated Composite Circular Cylindrical Shells”, ICCE/3, Third International Conference on Composites Engineering, Proceedings, pp. 435-436, 1996.

 

  • Anlaş, G. and Elbeyli, Ü., “Laminated Composite Plate Subjected to Transverse Line Loading as a Result of Low Speed Impact”, ICCE/3, Third International Conference on Composites Engineering, Proceedings, pp. 71-72, 1996.

 

  • Anlaş, G., “Effective Moduli of Short Fiber Reinforced Composites with Completely Cracked Fibers”, ESDA-ASME, Integrated Design and Manufacturing of Composites, PD-Vol. 64-2, pp. 125-130, 1994.

 

  • Ardıç, E. S., Anlaş, G. and Kayran, A., “Kompozit bir Malzemedeki Çatlak Ucu Gerilmelerinin Klasik Olmayan bir Yaklaşımla Hesaplanması”(in Turkish), 8th National Mechanics Conference, Proceedings, pp. 107 –116, 1993.

 

  • Anlaş G., Santare, M. H. and Hall, I. W., “Deformation of Short Fiber Metal Matrix Composites”, Enhancing Analysis Techniques for Composite Materials. ASME, NDE Vol. 10, pp. 279-285, December 1991.

 

 

Û Back to Homepage